Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Carrier Air Duct Cleaning in Florence-Graham, CA
We provide independent Carrier air duct cleaning across Florence-Graham, and the one thing that sets our work apart here is this: most Carrier systems in 90001 were retrofitted into 1920s – 1950s bungalows long after the houses were built, so the duct runs are short, cramped, and often non-standard. That means the cleaning has to be done with custom brush and vacuum setups, not assumptions from a manual. If your Carrier system is pulling dust from wall cavities or losing airflow through a torn flex run, call (855) 473-3133 and we’ll give you a straight answer on what it needs.
Why Florence-Graham Residents Choose Us for Carrier Service
We’ve spent 12 years, since 2014, cleaning and repairing Carrier forced-air systems across South LA. Teddy Soto, our owner, grew up in the Bodger Park neighborhood of Hawthorne and learned the mechanical fundamentals at El Camino College before putting in years on duct systems throughout the South Bay. That hands-on background is why we don’t guess at what a Carrier unit needs. We know the specific ways their furnaces and condensers fail in tight bungalow retrofits here, because we’ve pulled the evidence out of hundreds of return plenums and evap coils in Florence-Graham. Customers choose us because we explain what we found, show you the photos, and don’t sell work the system doesn’t need. We’re an independent Carrier service provider, not a manufacturer shop, which means the recommendation you get is based on the condition of your ductwork and equipment, not a quota.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Carrier Air Duct Cleaning Problems We Solve in Florence-Graham
- Return-air plenum leaks on upflow furnaces in repurposed closets. Factory gaskets on Carrier upflow furnaces dry out over time and start pulling dust from the wall cavity. In Florence-Graham, where many furnace closets sit against old stucco walls with gaps behind them, that dust loads the blower and evap coil fast. We seal the plenum with mastic and clean the return side completely.
- Flex-duct collapses and tears in tight attic retrofits. Carrier retrofits in 90001 often route flex duct through attics that were never designed for mechanical runs. The dry, hot South LA air makes the duct liner brittle, and the collar is usually the first place it cracks. We repair the torn run and reinforce the connection so it doesn’t collapse again at the same fitting.
- Evaporator coil fouling from freeway-adjacent dust. Homes near the I-110 and Alameda industrial edges see return-side dust build up fast. When the filter rack leaks, that dust skips the filter and packs the coil face on Carrier condensers paired with older air handlers. We clean the coil and seal the filter rack so the next season doesn’t start with the same restriction.
- Heat exchanger cracks on Carrier 80% furnaces in converted garages. Converted garage furnace spaces in Florence-Graham often have tight clearance and undersized returns. Restricted airflow stresses the heat exchanger, and on older Carrier 80% units that’s where cracks start. We inspect the exchanger, give you an honest repair-or-replace comparison, and never push a replacement when the unit still has life.
- Blower clogs from return-side dust in multi-generational homes. Dense blocks in Florence-Graham mean more people, more cooking, more indoor activity, and more dust cycling through a bungalow’s return. A Carrier blower pulling from a leaky return will pack that dust into the wheel and lose airflow within a season. We pull the blower, clean the wheel and housing, and seal the return so it stops happening.
Carrier Service in Florence-Graham: What Local Conditions Mean for Your Equipment
Florence-Graham is one of the densest, most heavily working-class communities in South LA. The housing stock is mostly small 1920s – 1950s stucco bungalows on tight lots, with later-added forced-air systems that were squeezed into closets, crawl spaces, or garages never meant for them. That means a Carrier furnace installed in a home along a street near Alameda is rarely sitting on a proper plenum with a clean, straight return. The return is often pulling from a wall cavity, the flex runs are kinked where they pass through a closet ceiling, and the filter rack is whatever the last retrofit happened to mount. Warm, dry summers push heavy AC use for months, and the fine particulate from the I-110 corridor builds up on the return side faster than in coastal neighborhoods. The result is a Carrier system that works hard but clogs quickly, not because the equipment is bad but because the installation had to fit a house that wasn’t built for it. Our cleaning in Florence-Graham reflects that reality: we bring custom brush and vacuum setups for short, non-standard runs, and we check the plenum, collar, and return path before we ever start the vacuum.
Carrier Models & Products We Service in Florence-Graham
We clean and repair Carrier Comfort 92 and 93 series gas furnaces, Performance 16 and 17 series air conditioners, Infinity 80 and 96 series variable-speed furnaces, and 24ANB and 24ACC condenser units. For critical components like heat exchangers and control boards, we use OEM Carrier parts so the fit and tolerances are exact. For flex duct, mastic, and other repair materials, we use quality aftermarket products that meet or exceed code where the application allows, and we explain the trade-off before we quote. We don’t stock a wall of parts we don’t need. We order what your specific system calls for once we’ve seen it.
See the difference
Before
After
Before
After
Before
AfterCarrier Service Pricing in Florence-Graham
Air duct cleaning for a typical Carrier system in Florence-Graham generally runs $450 to $900 for the full system, including the return, supply runs, and plenum. Dryer vent cleaning runs $100 to $160. If we have to repair flex duct or seal a leaking plenum, materials and labor are added to the written estimate; an aftermarket flex run replacement typically adds $180 to $340. Evaporator coil cleaning on a Carrier condenser pairing usually falls between $250 and $500. The final price is set by the written estimate, and the estimate is free. Call (855) 473-3133 to schedule one, and we’ll give you a number that covers the job before any work starts.
Serving Florence-Graham, CA – Our Local Coverage Area
We serve Florence-Graham and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Carrier Air Duct Cleaning in Florence-Graham
Because the return side is usually pulling from a wall cavity or a leaky filter rack, not a sealed duct. The dry, dusty air around the I-110 and Alameda corridor loads the return fast, and the blower packs that dust into the wheel and evap coil. Sealing the return plenum and cleaning the full path is what actually slows it down. Call (855) 473-3133 for an inspection and quote.
Yes. Much of our work in Florence-Graham comes through Spanish-language neighbor referrals, and we communicate pricing, scope, and what we found in Spanish when the homeowner prefers it. A single clean on one bungalow often leads to calls from the houses on either side, and we treat those referrals with the same straight explanation of what the system needs.
Yes. A torn flex run at the collar is a common failure on Carrier retrofits in Florence-Graham, and it usually doesn’t require replacing anything beyond the damaged section. We cut out the torn portion, fit a new quality aftermarket flex run, and seal the collar with mastic so it doesn’t crack again in the dry attic heat. The repair is priced by the written estimate.
Often, yes. When the return side loads with dust from a leaky filter rack, the evap coil face clogs and the system can’t move air or shed heat. We clean the coil, seal the filter rack, and clear the return path so the condenser has clean airflow again. Call (855) 473-3133 and we’ll tell you whether the ducts are the culprit or something else is going on.
No. We are an independent Carrier service provider, not manufacturer-affiliated or authorized. That’s exactly why we can tell you straight what your system needs without pushing a brand agenda. For critical components we use OEM Carrier parts, and for duct repairs we use quality materials that fit the application.
Service Areas Near Florence-Graham
We also serve Hawthorne, San Pedro, Palos Verdes Estates, Manhattan Beach, Pacific Palisades, and Brentwood. Each of those areas has its own housing stock and duct conditions, and we treat every system the same way: find the source of the dust, seal it, and clean the full path.
Book Your Carrier Service in Florence-Graham Today
If you’re in Florence-Graham and your Carrier system hasn’t been cleaned in years, or you’re seeing dust around the registers no matter how often you wipe them down, call (855) 473-3133. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free, and the written estimate sets the price before any work begins.
Written by Teddy Soto, Owner at Duct Cleaning Hawthorne, serving Florence-Graham since 2014.