Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Florence-Graham, CA
We provide independent Lennox air duct cleaning across Florence-Graham, and the work here is different because most of these systems were retrofitted into homes never designed for forced air. Expect a thorough cleaning, not a quick pass: we address the short, kinked return runs and cramped closet air handlers that make 90001 jobs unique. Call (855) 473-3133 for a free estimate. We answer 24/7 with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Florence-Graham Residents Choose Us for Lennox Service
We’re a focused duct-and-vent shop, not a generalist HVAC company that tacks on duct cleaning. Our techs have spent years opening Lennox cabinets in the dense blocks of South LA, so the cramped closet conversions and non-standard flex-duct layouts here don’t surprise us. We use Rotobrush and Nikro extraction systems, the same professional-grade equipment trusted by restoration and remediation contractors, not consumer-grade shop vacs. Teddy Soto, our owner, grew up in Bodger Park and learned the mechanical fundamentals at El Camino College before starting this company in 2014. He’s been straight with customers about what actually needs attention ever since, and that candor travels fast on blocks where neighbor referrals drive every new job. Being an independent Lennox specialist means no dealer badge, just field reality.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Florence-Graham
- Choked Merit Series coils in closet conversions: Lennox Merit Series condensers and evaporator coils jammed into closets or garage conversions collect dust and lint fast because there’s no clearance for airflow. Within a couple seasons, the blower wheel mats with dry 90001 particulate and the coil loses its ability to move heat. We pull the blower assembly, clean the wheel, and wash the coil in place where clearance allows.
- Leaking retrofit flex-duct returns: Original installers forced flex duct around framing in tight attics and closet chases, which means sagging runs and disconnected collars. Return-side leaks pull attic dust and freeway-corridor particulate straight into the airstream. We inspect every accessible collar, re-seal with mastic, and replace torn flex sections.
- Dust-loaded blower compartments on older furnaces: Older Lennox furnaces with standing-pilot or early hot-surface ignition boards sit in repurposed closets with poor return-air paths. The heat exchanger and blower compartment load up with the dry dust that blows off the I-110 and Alameda industrial edges. A full blower pull and compartment clean restores airflow and quiets the system.
- Hot attic duct runs killing efficiency: Uninsulated Lennox duct runs through Florence-Graham attics absorb heat during the long inland-influenced summers. Even a clean system underperforms when the air warms before it reaches the registers. We seal and re-insulate the run between the air handler and the registers so you’re not paying to cool your attic.
- Short, kinked returns that starve the blower: Because these bungalows were built in the 1920s through 1950s, forced air was an afterthought. Return ducts often run just a few feet, kinked and undersized, which strangles airflow and pulls particles from the nearest closet or wall cavity. We clean what’s there and advise on realistic fixes when the return path is simply too small.
Lennox Service in Florence-Graham: What Local Conditions Mean for Your Equipment
The real story in 90001 is retrofitted-duct reality. These small stucco bungalows and multi-unit buildings were built decades before anyone thought about central air, so the Lennox systems here are nearly all later additions: flex duct and air handlers squeezed into closets, garages, and attics on narrow lots where no manual ever matched the layout. Return runs are frequently short, kinked, and leaky at the collar, which means they pull attic dust, garage lint, and dry South LA particulate straight into the blower. Add the constant dust load from the I-110 corridor and Alameda industrial edges, and the return side of the system dirties far faster than the supply side. That’s why return duct cleaning matters more than supply-side on most Florence-Graham jobs. On a referral call off a dense block near Alameda, our crew opened a closet-converted air handler feeding a Merit Series system and found the return flex collapsed and torn where it was forced around the door framing. The blower wheel was caked in dry attic dust. We re-sealed the run, replaced the damaged flex with mastic-sealed collars, cleaned the coil, and the homeowner’s neighbor booked a full system cleaning the same week. That’s how work moves here.
Lennox Models & Products We Service in Florence-Graham
We service the full range of Lennox residential forced-air equipment common in Florence-Graham: Merit Series air conditioners, Elite Series variable-capacity units, SL280V and EL280 gas furnaces, and Dave Lennox Signature Collection systems. We choose OEM Lennox parts for coils, control boards, and ignition components where the match matters, and quality aftermarket for generic items like flex duct, mastic, and vent caps. On older equipment, we’ll tell you plainly when sealing and cleaning will get more years out of it versus when a failing heat exchanger or coil means replacement is the smarter spend. If the air coming out of your vents smells like your attic, we should probably talk.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Florence-Graham
Duct cleaning on a Lennox system in Florence-Graham typically runs $450 to $900 for a full residential system, depending on the number of returns, the condition of the flex runs, and how much clearance exists around the air handler. Jobs with collapsed returns or heavily matted blower wheels land on the higher end because the labor changes. Every estimate is free and written, with one flat price per system agreed before we start. Call (855) 473-3133 for a quote. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Florence-Graham, CA – Our Local Coverage Area
We serve Florence-Graham and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Florence-Graham
Yes. We work in closets and garage conversions every week, using compact extraction tools from Rotobrush and Nikro that fit where larger rigs won’t. We clean what’s accessible, inspect the return run for kinks and leaks, and re-seal collars with mastic in place.
The dry dust off the I-110 and Alameda industrial corridor loads every return in 90001, and the retrofitted return paths in these older bungalows leak at the collars, pulling attic particulate straight into the blower. It’s not your filter; it’s the combination of local dust and non-standard ductwork.
We use OEM Lennox parts for coils, control boards, and ignition components where the match matters. For generic items like flex duct, mastic, and vent caps, we use quality aftermarket parts that fit correctly and hold up. Call (855) 473-3133 for specifics on your system.
Yes, especially in Florence-Graham where uninsulated attic duct runs absorb heat during long, dry summers. Cleaning restores airflow, and sealing plus insulating the run between the air handler and registers keeps cool air from warming before it reaches the rooms. It’s one of the most common fixes we make here.
Yes. A large share of our Florence-Graham jobs come from Spanish-language referrals, and we walk every customer through the work in the language they’re most comfortable with. You’ll know exactly what we found, what we cleaned, and what it cost before you pay anything.
Service Areas Near Florence-Graham
We serve Florence-Graham and nearby neighborhoods including Hawthorne, San Pedro, Palos Verdes Estates, Manhattan Beach, Pacific Palisades, Brentwood, Westmont, and Crenshaw. If you’re anywhere in the South LA basin, call us for an estimate.
Book Your Lennox Service in Florence-Graham Today
We offer free written estimates, one flat price per system agreed before work starts, and before-and-after photos of your own ducts so you know the job was done. Call (855) 473-3133 to schedule. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by Teddy Soto, Owner at Duct Cleaning Hawthorne, serving Florence-Graham since 2014.